Analysis & Design of Submarine Structures
- Online Analysis & Design of Submarine Structures Training.
- Course focuses on structural design, philosophy, and strength formulations.
- Designers aim for high strength, low density materials for submarine structures.
- Engineers, managers, fabricators, scientists, and technologists should attend.
- Materials for submarines above 700N/mm² proof stress are discussed.
Overview
The Online Analysis & Design of Submarine Structures Training course focuses on the structural design of submarines, emphasizing the selection of materials for weight critical designs and resistance to high dynamic loads. It covers essential strength formulations and design philosophy. The course targets Engineers, Operations managers, Fabricators, Applied Scientists, and Technologists involved or interested in submarine design. The duration is 4 days.
Who should attend
Engineers, Managers, Fabricators, Scientists, Technologists
Course Content
Online Analysis & Design of Submarine Structures Training
ABOUT THE COURSE
Most submarine designs are weight critical, especially as operational diving depth increases. It follows that designers will strive to select an available high strength low density material compatible with good fabricability and toughness. Toughness is required not only for the usual low temperature reasons, but also to resist high dynamic loads from depth charge attack. High strength steels have proved to be reasonably satisfactory, the main limitation being how to achieve adequate weldability and toughness for military submarines with steels above about 700N/mm2proof stress. More exotic materials would be considered for depths exceeding 1000m say. At really great depths the required pressure hull thicknesses can become so large that buckling ceases to be a problem even with low modulus materials and frames can effectively be dispensed with. In many respects the design then becomes simpler and the conventional safety factor can be reduced. This course is meant to provide comprehensive coverage of structural design and also concentrate on philosophy and underlying essentials and strength formulations for design.
WHO SHOULD ATTEND
The course is intended for Engineers, Operations managers, Fabricators, Applied Scientists and Technologists interested in submarine design.
Duration:4 Days
Cost: £1195 + Vat
