*VIRTUAL* – Decoding Eurocode 7 training Basis of geotechnical design

Request info

Online Eurocode 7 Training

Pre-requisites

Delegates should have a basic understanding of geotechnical design, but no prior
knowledge of the Eurocodes is necessary.

Eurocode 7 is the current European and British standard for geotechnical design. This
course explains how the code differs from traditional practice and other standards in the
Eurocode suite. It concentrates on the design fundamentals, which engineers need to
understand before attempting detailed design. Practical tutorials show delegates how to
apply the fundamental Principles embodied in Eurocode 7.

Aims and objectives

On completion, delegates will have a sound knowledge of the principles of Eurocode 7
and be able to apply them to simple geotechnical designs.

Course outline

1. Standards for geotechnical design
2. EN 1997-1 General rules
3. Verification of strength
4. Verification of stability
5. Verification of serviceability
6. Execution of geotechnical works

Workshops

1. Pad footing on dry sand
2. Basement subject to uplift
3. Settlement of foundation on sand

Intended audience

Geotechnical engineers, engineering geologists, civil engineers, structural engineers
involved in foundation design, clients, contractors, regulators.

Speaker
The course is given by Dr Andrew Bond. Andrew is Immediate Past Chairman of CEN
committee TC250/SC7, responsible for the maintenance and evolution of Eurocode 7.

Course duration and delivery

The course is delivered publicly in the classroom over one full day.
The course is also made available from time to time via online delivery over 3-4 weeks
(each lecture lasting approximately 1.5 hours).
The course can also be delivered in house, by prior arrangement.
The course counts as 6 hours CPD.

Cost: £325 + Vat

 

Online Eurocode 7 Training Course

Virtual Eurocode 7 Training Course

Eurocode 7 Online Training Course

Eurocode 7 Virtual Training Course

SELECT wp_posts.*, wp_p2p.* FROM wp_posts INNER JOIN wp_postmeta ON ( wp_posts.ID = wp_postmeta.post_id ) INNER JOIN wp_p2p WHERE 1=1 AND ( ( wp_postmeta.meta_key = 'start_date' AND CAST(wp_postmeta.meta_value AS DATE) >= '2022-07-02' ) ) AND ((wp_posts.post_type = 'schedule' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'acf-disabled'))) AND (wp_p2p.p2p_type = 'schedule_to_courses' AND wp_posts.ID = wp_p2p.p2p_from AND wp_p2p.p2p_to IN (SELECT wp_posts.ID FROM wp_posts WHERE 1=1 AND wp_posts.ID IN (21695) AND ((wp_posts.post_type = 'courses' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'acf-disabled'))) ORDER BY wp_posts.post_date DESC )) GROUP BY wp_posts.ID ORDER BY CAST(wp_postmeta.meta_value AS DATE) ASC