Fatigue and Fracture (Structural Integrity)

Request info

Fatigue and Fracture Training Course

ABOUT THE COURSE
Following a general introduction to fatigue and fracture, with examples of service failures, current and developing fatigue design and assessment methods will be described. The course will go on to explain the importance of crack/flaw analysis in structural design and safety assessment and illuminate its wide range of applicability. It will give a deep understanding of the major results and criteria underpinning modern fracture mechanics, the assumptions behind them and important limitations. Attendees will gain a better understanding of material selection for fatigue and fracture resistance and learn about codified procedures for flaw evaluation.
The course will introduce fundamental concepts of Engineering critical assessment / Fitness for service assessments; from stress intensity factor, CTOD and J-integral to methods of measuring and calculating fracture toughness for use in the ECA assessment. The fracture and fatigue crack growth assessment methodology of BS 7910 shall be presented and illustrated with examples

WHO SHOULD ATTEND
Engineers and scientists involved in the design, operation and assessment of both onshore and offshore structures.

Duration: 2 Day

Cost: £850 + Vat

Fatigue and Fracture Training Netherlands, Scotland, Glasgow, Edinburgh, Inverness, Aberdeen and onsite course available throughout the UK.

SELECT wp_posts.*, wp_p2p.* FROM wp_posts INNER JOIN wp_postmeta ON ( wp_posts.ID = wp_postmeta.post_id ) INNER JOIN wp_p2p WHERE 1=1 AND ( ( wp_postmeta.meta_key = 'start_date' AND CAST(wp_postmeta.meta_value AS DATE) >= '2024-07-12' ) ) AND ((wp_posts.post_type = 'schedule' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'acf-disabled'))) AND (wp_p2p.p2p_type = 'schedule_to_courses' AND wp_posts.ID = wp_p2p.p2p_from AND wp_p2p.p2p_to IN (SELECT wp_posts.ID FROM wp_posts WHERE 1=1 AND wp_posts.ID IN (15540) AND ((wp_posts.post_type = 'courses' AND (wp_posts.post_status = 'publish' OR wp_posts.post_status = 'acf-disabled'))) ORDER BY wp_posts.post_date DESC )) GROUP BY wp_posts.ID ORDER BY CAST(wp_postmeta.meta_value AS DATE) ASC